9.49, SET, 750 cc/min, Honda, S2000, Injectors, Matched, Stainless, E85 Ready

Description

Fiveo List Price: 9.99
eBay Sale Price: 9.49 - You save .50
Flow rated at 750 cc/min at 3 BAR
4 wired, electrical connector adapters--US-CAR to Keihin (see photos)
FIVEOMOTORSPORT FUEL INJECTORS are custom-manufactured in small-quantity batches to achieve the highest quality product.
Our injectors are all-fuels rated; including gasoline (MTBE), and E-85.
The finished injectors are then flowed and inscribed with a control number.
Data is recorded for each injector. The fuel injectors are then grouped into matched sets ready for shipping.
FLOW CHART: Each set is sold with a complete and unique flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR.
As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle.
Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results.
Linear tuning with excellent low-end, and idle rpm.
Fiveo is the only fuel injector seller that can claim this level of technology.
SPECIAL NOTE TO OUR E85 USERS:
Ethanol based fuels tend to "dry" the fuel injector outlet orifices.
Users/tuners should be made aware that this may cause a "sticking" problem in fuel injectors that sit idle for a prolonged period of time.
It is suggested for applications running high ethanol content based fuels, to periodically incorporate into their fuel-system-maintenance a drop of light petroleum-based lubricant for each fuel injector.
This is also considered to be good maintenance, but not essential, for stainless steel based (Black-Ops Series) fuel injectors.
It should also be noted that for optimum performance the entire fuel system should be made up of ethanol approved materials including all fuel lines/fuel pump/fuel filter, etc.
Injector Body Design: Metal and composite plastic
Flow rates:
This set is flow matched to within 0.5 to 1.5%
We use the industry standard heptane as our testing agent.
750 cc/min at 43.5 psi (3 bar)
This fuel injector will function at rail pressures in excess of 145 psi, 10 bar.
Excellent low pulse width response with predictable response down to 1.5 ms.
Excellent atomization for modern multi-valve engines.
Injector type: EV-14
Application: Super-street and racing, naturally- and forced-aspirated engines.
Solenoid resistance: 12.5 Ohms
Fuel Delivery: Single-hole, modified disc
Electrical Connector: US-CAR
Spray type: wide cone, maximum atomization
Length: 2.5 inches, 62 mm
Diameter: 19 mm
O-rings: Top and bottom, Viton
Resistance: 11.8-15.5 Ohms (12.5)
Fuel types: All types of gasoline, Methanol, E85, E25, E10, MTBE additive
We adhere to the latest technology and craftsmanship techniques.