50KHz-200MHz 3.5" Screen Malachite Malahit DSP SDR Shortwave Radio Receiver New

Description

Description
:
*Aluminum alloy shell
* Malahit DSP SDR Receiver
* 3.5" IPS display touch screen
* Default frequency range: 50KHz-200MHz
* Demodulation mode: AM, SSB, NFM, WFM
Specification:
- Style:
Malachite SDR Receiver  /
Malachite SDR Receiver + SMA Ante
n
na
(optional)
-  The radio is constructed based on the SDR principle, and the function is determined by the loaded software.
- The frequency range is from 50 kHz to 200 MHz (default version) / from 50 kHz to 250 MHz, 400 MHz to 2 GHz (registered
Upgraded version).
- All types of analog modulation: AM, SSB, NFM, WFM;
- Powerful functions: variable filter width, adaptive noise suppressor, threshold noise suppressor,
Noise Blanker, AGC, equalizer.
- Use the fully functional chip msi001;
- The powerful stm32h743 with a clock frequency of 480 MHz is applied.
- 3.5-inch IPS display with touch screen.
- There is a built-in UHF.
- Control 2 encoders with buttons and touch screen.
- The power supply is supplied by the external TYPE-C (Huawei mobile phone) interface and can be charged by TYPE-C. The internal battery voltage is 3.7V and the capacity is 2500ma.
- The current consumption when listening to headphones is 300mA.
- Built-in receiving module In order to improve the HF reception on the antenna, an additional board with a source follower has been developed. The board will be built into the standard receiver design.
- Connect to the computer via USB, you can transmit CAT, IQ and audio.
- 160 kHz span, with scalability.
- Sensitivity-Under the condition of up to 250MHz, 0.3μV = 10dB at s / w.
- Due to the characteristics of the msi001 chip used, the dynamic blocking range is about 85dB.
- There is backlight control.
- SMA female antenna socket;
- Dimensions 102X74X29mm (excluding protrusions).
Tips:
The default standard configuration is only the host; other chargers and antennas are separately equipped.
Register the upgraded version to broaden the frequency and increase CW decoding and other functions.
Package Included:
1 x
Malachite SDR Receiver
or
1 x
Malachite SDR Receiver
1 x  SMA Ante
n
na
(
Depends on your choice)
Note:
-The default standard configuration is only the host; Other accessories, such as charger
and antenna are not included, please purchase separately.
-Default frequency range: 50KHz-200MHz.
-400 MHz to 2 GHz (registered upgrade version) broadens the frequency and increase CW
decoding and other functions. Please contact us if necessary