-40%

CLUTCHXPERTS STAGE 3 CLUTCH KIT+SLAVE+FLYWHEEL CORVETTE C6 LS3 6.0L 6.2L 7.0L

$ 400.75

Availability: 18 in stock
  • Warranty: YES
  • Return shipping will be paid by: Seller
  • Surface Finish: CAST IRON, 6-PUCK COPPER CERAMIC, CHROMOLY
  • Item must be returned within: 30 Days
  • Condition: New
  • Horse Power: 565 HP
  • Country/Region of Manufacture: United States
  • Brand: ClutchXperts
  • Returns Accepted: Returns Accepted
  • Manufacturer Part Number: CXP-082058HP3 CXP-082058CF
  • Torque: 530 lb-ft
  • Refund will be given as: Money Back

    Description

    ClutchXperts STAGE 3 CLUTCH KIT+SLAVE+FLYWHEEL CORVETTE C6 LS3 6.0L 6.2L 7.0L
    Description
    ClutchXperts Stage 3 Copper Ceramic Racing Clutch Kit
    is a brand new Stage 3 heavy duty racing pressure plate with Stage 3, 6 Puck Sprung Copper Ceramic Racing Disc setup can hold and 70% more pressure increase over stock. ClutchXperts Stage 3 6 Puck Miba Ceramic Racing Disc. A Miba buttons are ULTRA QUALITY Material For Friction Material In The Clutch Market.
    If you want the best the industry has to offer, ask for
    ClutchXperts 6 Puck Sprung Copper Ceramic Racing Disc
    . The ClutchXperts Racing 6 puck strip disc also uses our high torque internal assembly, but goes one step further in terms of friction. This disc uses an advanced hybrid iron and carbon combination delivering aggressive bite and increased thermal capacity. Uncharacteristic of the typical aggressive racing disc, the ClutchXperts Racing 6 puck strip disc provides outstanding stability, smooth engagement, and less wear on opposing plates. This combination has proven to be premier unit with regards to both performance and drivability for the daily driver with serious torque holding requirement. This system is recommended as the finest quality 'upgrade' from the original equipment clutch. This kit comes with everything you need for a new clutch job or clutch upgrade. Lastly, resurface and rebalance the flywheel prior to installation for best performance and result!.
    **The throwout bearing and pilot bearing (if required) included ( value) for free!
    Features of ClutchXperts Stage 3 Copper-Ceramic Racing Clutch System
    1. Heavy Duty Stage 3 Heavy duty racing pressure plate
    2. Hi-Leverage Design
    3. Precision heat treated single diaphragm
    4. Re-Arched Diaphragm for Superior Engagement
    5. High clamping force
    6. NO unnecessary increase in pedal pressure
    7. 6-Wings Ceramic Button Disc
    8. More Grip Power, longer lasting
    (Individual components available upon request)
    FLYWHEEL:
    Our ClutchXperts lightweight flywheel is an ideal performance modification because it has no disadvantages. There are significant benefits of having a lightweight flywheel. Though it does not create additional horsepower, the flywheel does allow the engine to more rapidly transfer its power to the drive train. Due to its reduced mass, it allows an engine to have quicker throttle response and rev faster under acceleration. Conversely, under a drop throttle condition, the car will slow down quicker due to the less rotational mass at the crank. You lose nothing in reliability, safety, or drivability on the street. What you gain is neck-snapping acceleration from your car.
    Using a lightweight, ClutchXperts lightweight flywheel is a race proven way to improve the performance of any street or race car. Lightweight flywheels have been used for many years by the world's most elite cars to improve both useable horsepower and extend engine life.
    If you see prices way less than others than competitors that means what you get is what you pay for Made where country with low labor with low craftsmanship with poor materials.
    COMPONENTS:
    ClutchXperts PREMIUM STAGE 2 HEAVY DUTY CLUTCH PRESSURE PLATE COVER
    ClutchXperts PREMIUM STAGE 2 COPPER CERAMIC CLUTCH FRICTION DISC (290mm, 26 spline)
    THROWOUT RELEASE BEARING W/ SLAVE CYLINDER (CONCENTRIC)
    PILOT BEARING/BUSHING (IF APPLICABLE)
    ALIGNMENT TOOL
    ClutchXperts 20LBS FORGED CHROMOLY LIGHTWEIGHT RACING FLYWHEEL
    APPLICATION:
    2005 - 2007 Chevrolet Corvette (6.0L V8 OHV 364cu. in.)
    2008 - 2013 Chevrolet Corvette (6.2L V8 OHV 376cu. in.)
    2010 - 2013 Chevrolet Corvette Grand Sport (6.2L V8 OHV 376cu. in.)
    2006 - 2013 Chevrolet Corvette Z06 (7.0L V8 OHV 427cu. in.)
    ITEM SPECIFICATIONS:
    Brand : ClutchXperts
    Manufacture Part Number : CXP-082058HP3 CXP-082058CF
    Surface Finish : CAST IRON, 6 PUCK COPPER CERAMIC. CHROMOLY
    Torque : 530 ft-lb
    Horse Power : 565 Hp
    Warranty : YES
    Country of Manufacture : USA
    **FILE PICTURES ARE FOR REFERENCE ONLY. ACTUAL ITEM MAY VARY
    Image Gallery
    STOCK PHOTO
    Payment
    Shipping
    Returns
    RMA #
    :
    Message us through eBay for RMA#.
    We do not allow any return without RMA#.
    Return Shipping
    : Buyer is responsible for return shipping cost.
    Exchange
    : Up to 30days from of purchase (Brand new condition, no restocking fee).
    Return
    :
    All returns will be subject to 20% restocking fee.
    Return your purchase for up to 30 days from date of purchase for a refund.
    Must be in brand new, resalable condition.
    Damaged Item
    : Message us through eBay.
    Manufacturer Warranty
    : 3 months or 3,000 miles(whichever comes first) from the date of purchase.
    Contact Us
    ClutchXperts, Inc.
    We are located in Southern California
    Please contact us through eBay messages by clicking on "Ask a Question".
    Business Hours : 9AM - 5PM Mon-Fri (Pacific Standard Time).