Ecotex® Plastisol Transfer Powder For Screen Printing

Description

Emulsion  |  Chemicals  |  Ink  | Equipment  |  Inkjet Film
Ecotex® Plastisol Transfer Powder For Screen Printing
Key Features:
Extends life of the print
Extends washability
Ease of use
Versatile - can also be used for foils
Ecotex® Plastisol Transfer adhesive is a bonding powder used to heat transfer ink. By using transfer powder on your plastisol ink you can guarantee a smoother transfer of ink onto desired material. While you can transfer ink without transfer powder, the powder extends the life of the print and washability. Transfer powder can also be used for foil transfers. It creates a secure and long-lasting bond between garment and foil.
How to use:
Run transfer paper through dyer to preshrink the sheet before using it on your press.
Burn your image backwards because one you get to heat pressing the image onto your garment the image will flip once again.
Use about 1/8 inch off contact.
If you are doing a multiple color print use a quick flash be careful not shrink the paper more before printing your next color
Once you are done printing you have to slightly cure your image but leave the image slight wet for the adhesion powder to have something to stick to.
Place powder into a bucket. Don't worry about over filling. Excess powder can be reused
Use gloves to dip the transfer paper into the bucket cover the entire printed area with the powder
Run the powdered print through the drier to gel the ink. If you are using Rapid Cure ink, which cures at 270F, run it through the drier at 200F. Gel the ink, do not fully cure.
Put excess powder back into the container.
Warning: Do not leave the powder out, moisture in the air will ruin it.
See our other items
Payment
Shipping
We accept payment by any of the following methods:
PayPal, Google Pay, Visa, Mastercard, American Express and Discover
We offer
FREE shipping
on all orders in the continental USA!
Your order will be dispatched same day after  receiving payment (Monday-Friday) if order is made by 12:00 PM PST and you should expect to receive it  two days after dispatch. If order is purchased together with multiple products your order may ship ground 3-5 days.
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
About
​​​​​​​
Mission
Screen Print Direct promises high quality products at revolutionary prices. We have cut the middle man out of the equation and offer superior products straight from the manufacturer. We will continue to innovate and only produce the best products at the best prices.
Our Promise
We promise to always provide affordable high quality products. We also promise to offer the best customer service and best screen printing advice, your success is our success. Our customers are real hustlers and go-getters! We know the humble beginnings of a print shop and your ambitious attitude & drive inspires us daily!
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Shop By Department
Key Features: ---Extends life of the print ---Extends washability ---Ease of use ---Versatile - can also be used for foils Ecotex® Plastisol Transfer adhesive is a bonding powder used to heat transfer ink. By using transfer powder on your plastisol ink you can guarantee a smoother transfer of ink onto desired material. While you can transfer ink without transfer powder, the powder extends the life of the print and washability. Transfer powder can also be used for foil transfers. It creates a secure and long-lasting bond between garment and foil. How to use: 1--Run transfer paper through dyer to preshrink the sheet before using it on your press. 2--Burn your image backwards because one you get to heat pressing the image onto your garment the image will flip once again. 3--Use about 1/8 inch off contact. 4--If you are doing a multiple color print use a quick flash be careful not shrink the paper more before printing your next color 5--Once you are done printing you have to slightly cure your image but leave the image slight wet for the adhesion powder to have something to stick to. 6--Place powder into a bucket. Don't worry about over filling. Excess powder can be reused 7--Use gloves to dip the transfer paper into the bucket cover the entire printed area with the powder 8--Run the powdered print through the drier to gel the ink. If you are using Rapid Cure ink, which cures at 270F, run it through the drier at 200F. Gel the ink, do not fully cure. 9--Put excess powder back into the container. Warning: Do not leave the powder out, moisture in the air will ruin it.
Ecotex® Plastisol Transfer Powder For Screen Printing
Key Features:
Extends life of the print
Extends washability
Ease of use
Versatile - can also be used for foils
Ecotex® Plastisol Transfer adhesive is a bonding powder used to heat transfer ink. By using transfer powder on your plastisol ink you can guarantee a smoother transfer of ink onto desired material. While you can transfer ink without transfer powder, the powder extends the life of the print and washability. Transfer powder can also be used for foil transfers. It creates a secure and long-lasting bond between garment and foil.
How to use:
Run transfer paper through dyer to preshrink the sheet before using it on your press.
Burn your image backwards because one you get to heat pressing the image onto your garment the image will flip once again.
Use about 1/8 inch off contact.
If you are doing a multiple color print use a quick flash be careful not shrink the paper more before printing your next color
Once you are done printing you have to slightly cure your image but leave the image slight wet for the adhesion powder to have something to stick to.
Place powder into a bucket. Don't worry about over filling. Excess powder can be reused
Use gloves to dip the transfer paper into the bucket cover the entire printed area with the powder
Run the powdered print through the drier to gel the ink. If you are using Rapid Cure ink, which cures at 270F, run it through the drier at 200F. Gel the ink, do not fully cure.
Put excess powder back into the container.
Warning: Do not leave the powder out, moisture in the air will ruin it.
See our other items
Payment
We accept payment by any of the following methods:
PayPal, Google Pay, Visa, Mastercard, American Express and Discover
Shipping
We offer
FREE shipping
on all orders in the continental USA!
Your order will be dispatched same day after  receiving payment (Monday-Friday) if order is made by 12:00 PM PST and you should expect to receive it  two days after dispatch. If order is purchased together with multiple products your order may ship ground 3-5 days.
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
About
​​​​​​​
Mission
Screen Print Direct promises high quality products at revolutionary prices. We have cut the middle man out of the equation and offer superior products straight from the manufacturer. We will continue to innovate and only produce the best products at the best prices.
Our Promise
We promise to always provide affordable high quality products. We also promise to offer the best customer service and best screen printing advice, your success is our success. Our customers are real hustlers and go-getters! We know the humble beginnings of a print shop and your ambitious attitude & drive inspires us daily!
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Shop By Department
Key Features:
Extends life of the print
Extends washability
Ease of use
Versatile - can also be used for foils
Ecotex® Plastisol Transfer adhesive is a bonding powder used to heat transfer ink. By using transfer powder on your plastisol ink you can guarantee a smoother transfer of ink onto desired material. While you can transfer ink without transfer powder, the powder extends the life of the print and washability. Transfer powder can also be used for foil transfers. It creates a secure and long-lasting bond between garment and foil.
How to use:
Run transfer paper through dyer to preshrink the sheet before using it on your press.
Burn your image backwards because one you get to heat pressing the image onto your garment the image will flip once again.
Use about 1/8 inch off contact.
If you are doing a multiple color print use a quick flash be careful not shrink the paper more before printing your next color
Once you are done printing you have to slightly cure your image but leave the image slight wet for the adhesion powder to have something to stick to.
Place powder into a bucket. Don't worry about over filling. Excess powder can be reused
Use gloves to dip the transfer paper into the bucket cover the entire printed area with the powder
Run the powdered print through the drier to gel the ink. If you are using Rapid Cure ink, which cures at 270F, run it through the drier at 200F. Gel the ink, do not fully cure.
Put excess powder back into the container.
Warning: Do not leave the powder out, moisture in the air will ruin it.