-40%
TF-3 Paragon Replacement Control Relay for most Paragon 220V/240V Volt Kilns
TF-3 Paragon Replacement Control Relay for most Paragon 220V/240V Volt Kilns
TF-3 Paragon Replacement Control Relay for most Paragon 220V/240V Volt Kilns

TF-3 Paragon Replacement Control Relay for most Paragon 220V/240V Volt Kilns

$ 15.3

Availability: 100 in stock
  • Condition: New
  • MPN: TF-3
  • All returns accepted: ReturnsNotAccepted
  • Brand: Paragon
  • Suitable For: Studio
  • Kiln Type: Kilns For Enamelling, Ceramics, Glass

    Description

    TF-3 Paragon Replacement Control Relay for most Paragon 220/240 Volt Kilns
    TF-3 Paragon Control Relay
    Relay 30 AMP, 12 Volt Coil
    This relay fits Kilns that run on 220V/240 volts. This is the relay for the 18" and up kilns. There are usually 2 or more of these relays in the larger kilns. These relays cycle and off during the firing. Relays have a life in the 300,000 click range. If one bank of coils does not heat or stays on, then a new relay is needed. If a relay fails on, switch the kiln off at the breaker and unplug the kiln. Do not run the kiln again until the relay has been changed. It takes all the relays working together for the kiln to work properly.
    Check your kiln to make sure of fitment.
    You may have more than one installed.